So I just finished wiring two U360 sticks using the wiring harness. I connected the controllers via USB to a Windows 7 machine and tested the inputs using Windows game controller properties. Everything works fine except the buttons do not match up.
Button one which is wired to brown works correctly as button one however no other buttons match up to the wiring diagram. For example, button two should be wired to blue however when checking what button is actually corresponds to in Windows it shows up as button six.
The wires are cut and soldered, am I screwed or can I program the U360's via firmware so that the buttons are correct? I'm aware that I can change buttons in each and every emulator I'm using so please don't suggest that unless it is the only option.
I'm using the wiring diagram from ultimarc.
https://www.ultimarc.com/ultrastik_inst.html
|