MAMEWorld Forums - EmuChat - Re: 360 Controller Keymapping

> > Hi all.
> >
> > Got a 360 controller working on my newly built PC but I'm trying to map the select
> > and start buttons as a coin and the start button alone as a start button. I have
> both
> > working but obviously the start button is always pressed with the coin and it's not
> > something I'd like, I'd rather both pressed would only do the coin and the start
> only
> > do start.
> >
> > I've been testing this out in California speed and modifying the controller config
> > file to see if the NOT action would work and tried this:
> > newseg type="standard">
> > JOYCODE_1_BUTTON_8 OR KEYCODE_1 NOT JOYCODE_1_7 JOYCODE_1_8
> > > > I still get the key combo recognised for the coin in but it doesn't block the start
> > button. Can it be done or am I missing something? thanks
>
>
> I used to use my 360 wireless all the time with MAME and other games.
>
> port tag="SYSTEM" type="START1" mask="4" defvalue="0">
> newseq type="standard">
> KEYCODE_1 OR KEYCODE_F KEYCODE_X OR JOYCODE_1_BUTTON8
> /newseq>
> /port>
>
> It the command I used to use to start the games, the problem is I don't know if it
> will still work or not, I only very recently got a working 360 wireless controller
> again. I even got the old one to work by switching battery compartments, battery
> exploded. So I just have to replace the battery holder, which is 2.99 online or so. I
> haven't tried the 360 cfg in a few years, but I will see what I need to change if
> anything to get it to work again.
>
> I will also include the full mapping I used, be warned I haven't used in years.

It's not using them in MAME, that works fine but rather making it so it ignored a button if a certain other was pressed, so like the start button in MAME wouldn't be pressed if select and start on the controller were pressed

----
On a quest for Digital 573 and Dancing Stage EuroMix 2

By gods I've found it!