Thanks for that info.
Fact is, I'm doing this for a customer and don't have the time or the inclination for a lot of software installation/configuration. The customer isn't interested either, so we're moving forward with the original install.
I do have another query, however; I installed the new system and started up. Windows xp startup sound blasted clearly out of the cabinet speaker system, but the video on the screen was unintelligible, although I could see movement when I moved mouse and right-clicked a desktop menu. I recalled that I had left the settings on for my bench monitor, so they were 1024x768/32bit. I didn't have a monitor with me, so had to take back to shop to reset video at Winxp default VGA 640x480 at 16bit. Is it likely that this was the issue or am I facing something worse? I did check the video controls on the arcade and that was not the problem.
I was able to see that the monitor is an Orion a48jll40x (Daewoo) and is being driven by a Wells Gardner board. The VGA connector is a standard VGA, but with only 12 pins, as follows: (x marks no pin)
. . . . . . . . x . . x . . x
I am going back tomorrow to retry and will have new secondary monitor with me, so can make changes to XP config. Any suggestions or advise is appreciated...
TIA
Joel
Tech on Tap
http://www.mytechontap.com
|