MAMEWorld Forums - EmuChat - trying to boot into MSDOS 6.22

I'm trying to use the ct486 driver to boot into MSDOS 6.22 using floppy images I got from PD. Using the command line:

Code:

mame64 ct486 -rompath f:\bios-computer -ramsize 16M -flop1 f:\ibm-ibm5170\disk1.img

I can get into the BIOS and change Floppy Drive A: to "1.44 MB, 3-1/2"" and change the boot sequence to "A, C", and "WRITE TO CMOS AND EXIT". It boots from the floppy image but it appears to hang at "Starting MS-DOS..." (see attached.)

I also tried with an older MAME (0.180) and get the same result, so I must be doing something wrong?

[Edit]:

So using the at486 driver, I was able to boot with the disk images I have and continue with setup. This brings back lots of memories. Thanks to all involved with this emulation!

p.s. I got a clue from reading this thread:

https://forums.bannister.org/ubbthreads.php?ubb=showflat&Number=90489&page=1

.

[ATTACHED IMAGE]

Attachment

--
A story of one man and his obsession with the female anatomy.

Edited by Andrew (12/08/19 06:20 AM)