> Well, I would say make sure your ram is top quality capable of high speeds if you are
> going to overclock that heavy and prepare to spend a decent time investment on
> testing settings/trial and error/stability tests.
Yep. Boards with limited overclocking options will typically overclock your memory as you try to increase the CPU speed, and only give you limited (or no) way to divide the memory clock back down. So you have to start with memory that will handle higher speeds. Also, depending on which memory speeds are programmed into your memory modules (SPD), you may need to manually set the memory specs if the board allows.
GroovyMAME support forum on BYOAC
|
Previous 
Index 
Next 
Flat 
Re: RAM (4GB vs 8GB) Vista x64 C2D E8500
Reply
