Sorry to be nitpicky but the info is wrong.
Code:
293 P1 - Motherboard Power Connector (located under the PCB) 294 P2 - Digital Video Output Connector (not used) 295 P3 - Controller Pad Board Connector (tied to lower PCB to J8 with a small flat cable) 296 P4 - Memory Card Slot Connector A \ (not used) 297 P5 - Memory Card Slot Connector B / 298 P6 - Serial Port Connector 1 (located under the PCB, tied to a plug/cable that leads to J10 on lower PCB) 299 P7 - Analog Video Output Connector (tied to a plug/cable that leads to J9 on lower PCB) 300 P8 - Serial Port Connector 2 (located under the PCB, not used) 301 P9 - Media Port Connector (joins to CN1S on the Media Board) 302 P10 - Hi-Speed Parallel Port Connector (located under the PCB, not used)
P7 is actually the Digital AV out, P2 is the analogue. While the analogue works fine (Used a standard GC Composite cable), the GC Board is NTSC-J and thus is outputting that system. The Analogue port is also blocked by a metal post.
----
On a quest for Digital 573 and Dancing Stage EuroMix 2
By gods I've found it!
|