> - Pin 13 of L4 and pin 13 of F4 should presumably be connected to VCC, these > connections weren't shown on the schematics. Depending on how your simulator works > leaving these unconnected might cause those chips to be held in reset.
Good catch! I already had found Pin 13 of F4 using the unconnected pins list, but L4.13 escaped me. Now there's something like a star field.
> - I have pin 1 of D6 connected to /VRESET instead of VRESET. Don't remember how I > came to this conclusion, but I specifically commented it as being an error in the > schematics, so you might want to look into it.
I'll take a look. The coin/reset and start section is somewhat awkward, because it's mixed with analog parts...
[ATTACHED IMAGE]
|